I ran arch for years then Manjaro. I had zero issues running doom eternal except if I switched workspaces then back. I’d have to kill -9 the app and relaunch. Was enough to make me dual boot to beat that game. I’ve been running Manjaro since, because I don’t have the time like I used to to fuck around with settings. I still prefer Linux overall as my daily drive though. It’s not a slow, buggy, ad ridden pile of shit. Imo windows is so buggy and slow since like 8 or 10
I’m currently struggling with Nobara and the growing amount of bugs with each new kernel update.
Otherwise I would have recommended that one, since it offers some great convenient features, like a graphical management tool for all sorts of Wine versions, which can be installed in parallel. The kernel supports fsync and is tuned for low latency. Game performance is decent and I also got all my games and launchers (native Linux and also Wine) working.
For the audio part, there is pipewire, which works like a charm. There is also a compatible flatpack for DSP/equalizer which I couldn’t find it on Ubuntu’s snap store: JamesDSP. Now, after some tuning, my rather flat-sounding headphones sound do super boomy.
It started with conflicts between the preinstalled gnome extensions - namely the desktop icons broke other extensions, like Pop!_shell for window tiling. So I had to disable desktop icons.
My latest installed kernel (6.5.11) breaks screen detection - The resolution is stuck at 1024x768.
My PC gets stuck (probably on self test) after reboot or switching it on, after Nobara has shut down. Solution: Pull the power plug, wait 10 seconds, reconnect and turn it on.
Alrighty then: Now I have a reason to switch graphics cards and install Nobara on my other SSD. I bought a Radeon RX 7600 for this setup, because of AMD’s praised open-source drivers. My spare GPU is an RTX 3060, so I can actually test both worlds.
That’s what folks over here tell me, and you are most probably right. There is still one more issue scratching my head though: RayTracing performance on Cyberpunk 2077: It works great on high settings with stable 50 FPS minimum on my Windows 10 + Nvidia build, but it’s quite the opposite on this Nobara + AMD system. 5FPS and slowdowns are just unplayable. I expected the bad AMD performance being fixed by today. I think I should swap GPUs between both systems and test again.
Enjoy I use mint 21.1 Victoria 21.1 xfce on my gaming laptop myself
Little tip make a second drive with a backup so that if it ever gets a bit to complicated you’ll have something to come back to also you could duel boot as well if you need windows for work or smth although tbh I hardly have any issues with mint it normally works outside the box . Mints an all-round decent distro in my expirence
I also recommend you install neofetch onto your system when you do install Linux you can customise neofetch to look however you want you can also rice neofetch as well
Everything worked the first time except… Steam! Unable to launch it, black window which restarted in a loop.
What package exactly did you install and from which source?
the keyboard preset is in Qwerty even though I have an azerty keyboard
If you set the layout correctly during installation of the system / in your system settings then that's not really Linux fault.
I was able to notice a bug in a rather disturbing shadow/light and in the drops of water on a windshield which appeared and disappeared in a strange way.
Very well explained.
So here I am, I hate Windows, but it runs my games better than Linux and I’m really lost. I’ve just discovered Nobara, I would have loved to try it but I’m tired of starting the first 3 hours of cyberpunk again and I’m convinced that I’ll have some graphical bugs with it.
Why restart? Back up your home folder to a different drive, install the OS and copypasta the home folder back into the new system. This is literally easier than under Windows because everything non system related is in the home folder. Games, save & config files, everything.
Same here. Radeon open source drivers. VR is working, too (HTC). Most oft the time what I need to find out is the correct Proton Version (Took me a bit oft time to geht Cyberpunk running). Other than that no problems at all.
That valve uses Arch is irrelevant in all honesty. Proton is not a Valve product, Valve is merely one of its users and contributors, and it is not wedded to one distro..Similarly Valves own Steam packages are not distro specifi, and there are other gaming platforms to consider which also benefit from Proton (for example you can get Gog windows games working in Linux too quite easily), as well as all the Retro gaming options.
Pick a distro you personally like. I use Mint as I like the cinnamon desktop interface and the distro is pretty much good to go from fresh install. I use Mint both as a dual install with Windows on my PC and also within VMs in Windows. I still spend a lot of time using Windows because of specific games compatibility and work related apps.
EndeavourOS seems a good choice if you do want to go the Arch route but it's only something I've played with in a VM.
If you want something gaming specific then Draugar seems like a good choice - it apparently uses Ubuntu LTS but with the mainline Kernel updates optimised for gaming. But I have no personal experience with the distro.
I also see a lot of people seem to like Pop!_OS, but again no personal experience.
Exactly. Proton is Valve’s name for their WINE-based product. It’s basically WINE with some patches to work with the Valve ecosystem.
It’s also largely community driven, but that didn’t make it not a Valve product, Valve still controls what goes in and what doesn’t after all (which is why projects like Glorious Eggroll’s proton builds are so prevalent, sometimes you want to try stuff Valve hasn’t approved yet).
I always recommend Linux Mint Debian edition. I don’t use it, but I’ve had friends who’ve had good luck with it. Straight Debian is a great choice as well. If packages aren’t new enough, you can always use testing and keep a really stable experience.
It honestly doesn’t matter much which you pick unless you’re using the absolute latest hardware or something. I personally use OpenSUSE Tumbleweed, which has worked really well for me. I don’t recommend it because there just isn’t as much help available online specific to the OS, so I tend to recommend more mainstream distros. I used Arch for a few years before I switched, and Tumbleweed feels pretty much the same, but with less fiddling.
Anyway, regardless of what you pick, feel free to come back and ask questions. Most problems have similar solutions regardless of distro because Linux is Linux, so please don’t hesitate to ask.
If you own a legit copy of the game, find a crack to remove the protection, or download an already cracked version. You paid for it, and should be allowed to run it how you want.
Endevour os for me. No issues on kde nvidia and wayland, pretty straightforward installation. If I were you I’d do some distro hopping in the new PC. I’d try one of those ublue images, then nobara then endevour and see what you prefer.
Big second for EndeavourOS. I loved Linux mint early in my distro adventures, but I had issues, sometimes steam wouldn’t launch. Sometimes my secondary monitor would lag out every minute or so. So I tried nobara, which was okay, but never fell in love with it.
Enter EndeavourOS. In over six months I’ve had one instance of a broken package hampering my experience. I keep a backup of important files on an external drive, so I just nuked it and reinstalled. I also use BTRFS and timeshift-autosnap, so if a package does create issues, now I can just boot to an older snapshot from grub and wait to update that package until the issue has cleared up.
Gaming on Wayland with Nvidia is straight up not enjoyable for games running through XWayland due to this bug. This affects all games running with Proton/Wine, Steam, Discord, Firefox without MOZ_ENABLE_WAYLAND=1 environment variable and many more
Endeavor is fine. But when it came to performance I had a number of issues. By default it put my i7 into power save. One could use core control to put it back into on demand or something more reasonable after every boot. Or go in and change the configs manually which I did. But that’s still beyond people in general. Also for whatever reason if I had more than one app actively using the GPU. Say blender open using GPU, accelerated cycles etc. And another window open doing something with OpenGL and Vulcan. I would get the whole system hanging under x11. I’d have to drop to the terminal. And kill all of it off and restart it again. And not just isolated. It was heavily repeatable.
I ended up giving Garuda a try. CPU scheduler is much more same out of the box. Graphics card support under x11 and Wayland has been rock solid as well.
They’re both arch. And it is all personal anecdotes on isolated systems. So make of it what you will. I like both systems though and actually have computers running both
Oh god yeah. I forgot about that. I applied all my normal look and mods within minutes of getting to the desktop the first time lol. After that it’s been great
See gamingonlinux.com/…/battlenet-broke-in-wine-proto… for details. I went this route as I play in Steam, I had to do a little bit of googling to find out that he means go to the properties of Proton (like you would a game) and change it to Beta there. My beloved SC2 is now running fine again :)
linux_gaming
Active
This magazine is from a federated server and may be incomplete. Browse more on the original instance.