Emphasis isn’t always possible with every utility, but a simple Unicode addition would work well for a variety of software, as well as be easy and readable on paper compared to underlines (especially if there’re words below). It’s also more accessible if you can’t draw straight lines to save your life. Like me.
I have declared war on notifications. My immediate family, two closest friends, and my boss can call me. In no other circumstances will my phone make a noise or vibrate. I will check my texts when I feel like it.
Other than a few exceptions, no apps may show the notification badge either. Discord will show DMs and mentions from one or two servers. Everything else is blocked. My work email may show unread email. I’ve even turned off banners on my work chat app. I don’t think I’ve checked my personal email in months.
All my recurring charges are paperless + autopay. That’s another notification badge I forgot about - I have a budgeting app that can show transactions. I categorize them, make sure their categories are covered, and I’m done.
On the first of the month, I pay rent and set the budgeting app categories. Then I have nothing to worry about, and near-zero distractions. My biggest pain point in life is deciding what to eat for dinner.
As far as I’m aware there’s currently no way to setup drives in RAID without wiping both of them.
I also haven’t tried encrypting my home/boot drive but normally if I want to make a complete backup of a drive I use Clonezilla. It’s saved my bacon many time including recently copying a HDD that was in the process of dying on me.
It might be easiest to just backup your home directory and reinstall Nobara to the drives after you’d set them up in RAID.
If your install is using LVM (which anything installed over a bit more than a decade should be) you can set up the new second drive as a RAID with a missing device, add it as additional PV, use pvmove to move all PEs to the RAID, remove the old PV, and now add that disk to the RAID.
Does that really work for RAID 0? Since RAID 0 is striped (with “zero” redundancy), I wouldn’t expect an array with a missing device to work at all. But I can’t say I’ve ever tried.
It should work - possible that it won’t let you create a one disk raid 0, but creating a one disk raid 1 and then converting it to a two disk raid 0 should word. It’s been years since I played with a pure raid 0 (don’t see much sense in them), but managed conversion back then.
I think Yunohost is great. It was easier for me to set up that trying to figure out Docker. I run a few sites including AdGuard Home as well as personal Pixelfed and Lemmy instances with it in a VM on an older Ubuntu box. That said, I’m stuck on Lemmy 0.18.2 without pict-rs because the update script to the latest version available on Yunohost (0.18.3 with pict-rs) is broken. Oh well!
I think HDDs are typically around 5-10DB, and they should spin down at night. Quieter is better, but I don’t need to go completely fanless. So basically, those tiny pizza box server fans are completely off the table, but larger, slower fans should be fine.
I’m thinking 25DB is a hard cap, ideally under 20DB.
I think HDDs are typically around 5-10DB,
Um no. More like 20-25db at idle, up to 30 during heavy seek activity, depending on model.
I run 3x 5400rpm drives in my NAS, and the drives are definitely the loudest parts in the whole build, and are definitely noticeable in the office room.
Really? I currently sit like 3’ from my current PC NAS, and while I can hear it, the fan noise seems louder (stock AMD heatsink and fan). This YouTube looks at very similar drives to what I have (my drives are WD 8TB NAS Plus 5400RPM, video is 8TB NAS Pro 7200), and the measurement is something like 10-15DB per drive. Mine should be quieter than the video, so I think it’ll be fine.
I’ll probably need to replace my drives soon since I got them 5 years ago (though they were off 80% of the time), so I may consider SSDs if the pricing looks reasonable (I’m only using 2-4TB right now, but I expect that to double or triple in the next couple years).
Anyway, this is a somewhat temporary situation. Quiet gives me options. If it’s too loud, I can keep it on my desktop. I’m more looking for lower power (currently use 50W-ish idle for whole system) and smaller form factor (current one is a massive ATX tower).
and the measurement is something like 10-15DB per drive
It seems to be a relative measurement, and so the values look to be 10-15dB above ambient, not the absolute dB of the drives. You can see he subtracts the background dB from the spl meter calibration early in the video.
Is your typical noise floor even under 20 dB? HDDs are also a lot louder than 5-10 dB, and manufacturers usually list dBA in their spec sheets, not dB.
A typical refrigerator is like 40dbA – 25dbA is ABSURDLY quiet. You’re not gonna hit that without a completely fanless system. If 25dbA is his hard cap, he can’t even be breathing in the same area as the computer, because that’s something like 28dbA…
I’m honestly not sure, I’m just pulling stuff from various online sources to get an estimate. This YouTube video measures noise from a single 7200 RPM WD Red drive, and I have 2x 5400 WD Red drives, so I’m guessing mine will be similar, if not a little quieter. I’d measure it myself, but it’s next to 2 other PCs and fan noise drowns it out.
Basically, I want it to work under my bed. It’s a large, thick bed (king size purple mattress; so basically foam), so I can stick it pretty far in to get some flexibility on what “quiet” means. We also aren’t particularly light sleepers, so our threshold is probably a little higher than others.
That said, I’m using the stock fan for my Ryzen 1700 (Wraith Spire I think?), and that’s way too loud for a bedroom (40dba-ish?), and I can’t really hear my drives over the fan unless I get really close. The spec on the drives say something like 20-30dba for my drives (I’m guessing that’s right next to the drive), and I think that’s quiet enough for my room, especially if I can dampen vibration a bit. But since the drives will probably spin down, I’m looking for fan noise around that level or lower, if I need a fan at all.
Don’t know if it’d be something worth while, but if you’re looking for a game to just pass the time, Devil Dice (or XI in Japan I think) for PSx. Trailer linked is highest quality I could find.
Since people are sharing their weather apps, I use Breezy Weather! Multiple sources, lots of info, FOSS, what’s not to like. I tried multiple sources untill I found one that was the most accurate for me.
kbin.life
Active