There have been multiple accounts created with the sole purpose of posting advertisement posts or replies containing unsolicited advertising.

Accounts which solely post advertisements, or persistently post them may be terminated.

areyouevenreal

@[email protected]

This profile is from a federated server and may be incomplete. Browse more on the original instance.

areyouevenreal ,

Deep fat fryers are fairly easy to use though. Also quite quick. They don’t need cleaning with every use (maybe every 5 or 6 uses). What they aren’t good for is having a clean kitchen. Creates steam, oil splatter, and they smell when in use. Can be a complete bitch to clean too, especially depending on the design. Even the easy to clean ones eat soap as the waste and dirt is oil saturated.

areyouevenreal ,

I said they smell when in use. If you’re not using it it has a lid on, so you don’t really smell it. Unless you just don’t put the lid on…

areyouevenreal ,

If you actually cared about space you wouldn’t have an air fryer and a rice cooker. You would use a convection oven and a pan respectively. Also how is it any easier to do boiled eggs? Surely the hardest part is peeling it. Rice cookers I can see being useful because they avoid cleaning pans with rice stuck to the bottom all the time.

areyouevenreal ,

I am a bit lost on what you can do with one that an oven can’t. I get they are slightly faster and more energy efficient, but functionally I thought they were basically the same. What am I missing?

areyouevenreal ,

Someone has never done software development or worked on a build pipeline and it shows. Obviously complex software has lots of dependencies especially compiling from source.

areyouevenreal ,

It’s been a long time but generally network issues and reinstalling bootloaders or kernels. Fairly easy if you can chroot.

areyouevenreal ,

8GB of RAM is a dog shit spec

areyouevenreal ,

It’s almost impossible to find a job as a graduate even with a master’s degree. The industry has gone to shit.

Paris Olympics lifts intimacy ban for athletes and is stocking up on 300,000 condoms (www.cbsnews.com)

The intimacy ban that had been in place for the 2020 Tokyo Olympics has been lifted for the 2024 Paris Olympics, and the Olympic village, where the athletes stay during the event, will be stocked with 300,000 condoms, Laurent Michaud, director of the village, told Sky News....

areyouevenreal ,

You didn’t read the post at all did you?

areyouevenreal ,

I thought primaries were still happening? Not the general election.

areyouevenreal ,

Anarcho-communism is by definition socialist. It’s also far left wing. Be careful who you are criticising.

areyouevenreal ,

Do you have any evidence that the DNC are against RCV?

areyouevenreal ,

Then you understand it wrong. Communism is socialism by definition. Maybe try actually looking up the definition of socialism that marxists and anarchists actually use. It’s a broad term but not a nebulous one as it has a concrete definition: a society where the working class own/control the means of production.

areyouevenreal ,

The spoken language is the actual language. If three things are written different but sound the shame, then that’s a failure of the writing system, not the individual.

areyouevenreal ,

Wagwan dickhead,

We already have different spellings in different countries. If we truly cared about the international part we would have a customized writing system just for that, which would probably remove the three theirs. We would also have a standard international spelling. Instead what happens is the American version gets used since they are the biggest and everyone has to deal with their version. The people who invented the fucking language get left behind. So there isn’t really a reason not to fix it since English is diverging anyway.

If Americans fix it then it will just become the norm anyway, except in England because fuck America that’s why. If it becomes the norm in England then nobody will care because it’s England, and we aren’t an empire anymore. Not that we would because there are far too many posh twats in England who get off on correcting people’s grammar. Oi listen, maybe the road men could get this done, you feel me? As for what happens if Canada adopts it, ay, I wouldn’t worry aboot that.

Apologies for the road man impression. Best I could do y’all.

All of ye might want to take note that not all UK people speak the same language. To say otherwise takes the pish. Anyway I best bob up the apple and pears and go beddy byes. Nice talking to you wee lad.

p.s. I tried to fit as many localisms into this as possible. How did I do?

areyouevenreal ,

Yeah probably using NTFS was your issue. I had the same problem with ExFAT.

areyouevenreal ,

Unless those steps are overthrowing the rich then I think the person you are talking to is correct. This is a money problem not a psychological problem and most money problems are because of capitalism. Get a higher paying job? FFS what actually makes one job more valuable than another? It sure isn’t how essential it is as plenty of high pay jobs are things like finance bros.

areyouevenreal ,

Yeah this guy is consistently defecting and giving bad advice. I don’t think they have any experience with the current job market, economy, or just the state of capitalism in general. Psychologists aren’t even the right people to go to here, you need a career specialist for that. If they said to get more qualifications instead that would make more sense, but clearly they just want to add therapy to everything as if that’s gonna fix it.

areyouevenreal ,

Stop trying to fit therapy to every problem. That’s not what it’s for. The best advice would be to upskill and gain qualifications - which not everyone can afford. Stop trying to ignore physical reality and claim the economy and everything is fine when it clearly isn’t. Admit there are problems and actually do something about it! Complain to politicians, unionize, strike.

Telling people to go to therapy for economic and financial problems is maybe the dumbest thing I have heard unless you have a problem with impulsive purchases or the like.

areyouevenreal ,

That’s a hypothetical scenario and not at all the same one you were describing earlier or the scenario the other commentor is in. Stop trying so hard to be right. Even this scenario could be explained by exhaustion from working your current job.

It costs you nothing to admit that you made a mistake and that sometimes psychologists aren’t the right answer. You only need a psychologist for career based problems in very specific scenarios for example when mental health issues or mental disabilities impact your work. Outside of that is what a career specialist is for, they should be a first port of call for career based problems as that’s exactly what they specialize in.

areyouevenreal ,

It feels bad that this could actually work for some places.

areyouevenreal ,

That’s not how that works unfortunately. Job requirements change, different businesses have different requirements, and furthermore you probably need to look at a more advanced job for more money which requires more qualifications. For example in the tech industry jobs that you could get with experience or working up through a company now requires a degree because there are more people working in tech with degrees now. It’s supply and demand to put it simply.

areyouevenreal ,

Yes that actually makes sense. Gas is used in most homes, and is considerably cheaper than resistive electric heating. Probably you can get a subsidy for the heat pump.

areyouevenreal ,

There are better inkjets like tank printers using ink bottles. Cheaper per page than even laser printers, and can’t detect 3rd party ink (cause it’s a liquid lmao). None of this subscription stuff is required. They don’t have the gamut of say 7 cartridge ink jets obviously, but still better than laser printers I imagine. The main drawback is the extra maintenance of an inkjet with them drying up and all that.

So stop buying HP in other words.

areyouevenreal ,

Y’all are confusing inkjets for subscription printing. Buy a tank printer or just a decent inkjet and don’t take the subscription. Problem solved. Tank printers can’t detect third party ink either, because it’s just a liquid. Tank printers are both cheaper per page and do more pages to a refill.

areyouevenreal ,

Have you heard of CPU and GPU caches and registers? Even the storage in a PC has cache(s).

areyouevenreal ,

Yes that’s because nobody actually uses Inkjets correctly. They aren’t meant to be unplugged and left to rot. They are meant to be used. If you only use a printer occasionally buy a laser printer.

areyouevenreal ,

Look up Epson EcoTank. There are other companies that make tank printers as well I believe.

areyouevenreal ,

I’ve never had to take it apart. I have had to run head cleaning a few times, but that’s from leaving it unplugged for a while. Aside from that it works alright. I don’t get why they would need to take it apart, that sounds like a massive exaggeration.

areyouevenreal ,

What did they do to you?

areyouevenreal ,

Yes and no. I have one and they work fine until you unplug them for any length of time. Then you have to deal with cleaning all the printheads and getting it to work properly again. Typically needs multiple passes before it will print right. I know it’s a problem with all ink jet printers. It’s a shame toner is more expensive and colour laser printers are so expensive. If not I would switch to one of them.

areyouevenreal ,

Actually they have a power wash feature you can use. It just wastes a lot of ink.

areyouevenreal ,

Where is this coming from? Do you have any sources?

areyouevenreal ,

Ironically people do actually use Edge on Linux. Beats me lol.

areyouevenreal ,

It’s still reporting to Microsoft and has all the restrictions they place on it.

areyouevenreal OP ,

You miss the part about XDG dirs?

areyouevenreal OP ,

Trying to get a real debrid client to work right. It seems the internal downloader doesn’t work, and it supported using aria2.

areyouevenreal OP ,

Already done that. This is the only one that supports working with sonarr and radarr afaik.

areyouevenreal OP ,

I am using this client: github.com/rogerfar/rdt-client

I might have to try JDownloader. I forgot you could use it as a debrid client.

areyouevenreal ,

That’s going to be almost impossible to do with an iGPU. Makes way more sense to pass through to LXC.

areyouevenreal ,

2-3 clicks? That’s hilarious!

These are the steps it actually takes: 3os.org/infrastructure/…/igpu-passthrough-to-vm/

That’s the best case scenario where it actually works without significant issues, which I am told is rarely the case with iGPUs.

In my case it was considerably more complicated as I have two GPUs from Nvidia (one used for host display outout), so I needed to block specific IDs rather than whole kernel modules.

Plus you lose display access to the Proxmox server which is important if anything goes wrong. You can also only passthrough to one VM at a time. Compared to using LXC you can passthrough to almost unlimited containers, and still have display output for the host system. It almost never makes sense to use PCIe passthrough on an iGPU.

The reason to do passthrough is for gaming on Windows VMs. Another reason is because Nvidia support on Proxmox is poor.

This is a guide to do passthrough with LXC: blog.kye.dev/proxmox-gpu-passthrough

It’s actually a bit less complicated for privileged LXC, as they are having to work around the restrictions of unprivileged LXC containers.

areyouevenreal ,

My point is it’s not actually much (or potentially any) simpler to use PCIe passthrough than using an LXC. Yet it comes with more resource usage and more restrictions. Some hardware is more difficult to pass through, especially with iGPUs. I don’t even think all iGPUs even use PCIe.

areyouevenreal ,

Not all of them. Have a look at a Raspberry Pi or Apple Silicon devices. In fact most ARM SoCs I am fairly sure don’t use PCIe for their iGPUs. This makes sense when you think about the unified memory architecture some of these devices use. Just in case you aren’t aware Proxmox does indeed run on a raspberry pi, and I am sure they will gain support for more ARM devices in the future. Though I believe an x86 device with unified memory could also have problems here.

areyouevenreal , (edited )

AMBA/AXI-bus in the case of the Pi. GPUs existed long before PCIe did lol.

One some x86 systems the CPU and GPU aren’t connected with PCIe either. AMD has infinity fabric that they use for things like the Instinct MI300 and some of their other APUs

Edit: Oh yeah also ARM isn’t just low power anymore. It’s used in data centers and super computers these days. Even if it was there is lots of stuff you can do with a low power node, including running file servers, DNS or Pi hole, web servers, torrent/usenet downloaders, image and music servers, etc. I have also seen them used to maintain cluster quorum after loss of one more powerful node. A two node cluster won’t have quorum if one fails, so adding a pi as a third node makes sense.

areyouevenreal OP ,

Where would I find a device that could run DDWRT or OpenWRT? WiFi 6 is basically a minimum requirement at this point given I already have a WiFi 6 router and WiFi 6 devices. It would be silly downgrading just for the sake of using WRT.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • random
  • lifeLocal
  • goranko
  • All magazines
    •