in the quest to fill an outer wilds-shaped hole in my life I have picked up and am currently playing The Witness, Fez, and The Talos Principle. Also I’ve been slowly working my way through Chips Challenge and The Baba is You since like 2020.
Those are some nice games and while nothing could yet fill the Outer Wild shaped hole for me (except the DLC, play that one if you haven’t yet) I can also recommend the following games which are in one way or another similar (but again: only in certain parts, nothing is like OW yet):
Heaven’s Vault (very multi-branching/non-linear adventure where you learn to decipher a fictional language while traveling through space with your robot companion, great writing & world building)
Eastshade (relaxing open world with great atmosphere & without combat where you solve quests by painting pictures)
Return of the Obra Dinn (nice logic game where I really felt like a detective and also wanted to figure the story out)
Disco Elysium (contender with OW for Best Game Ever in my mind. Wonderful, life like characters and the writing plays your emotions like an instrument from laughing to crying and back. Pirate it however, since the original developers got duped out of their studio)
Also: play the Talos Principle DLC if you like the atmosphere and style of the main game. I really enjoyed the forum/community board feeling from the imprisoned robots in the DLC as somebody who lived through the 2000’s internet era.
Max Payne, first time playing since I bought the game nearly 15 years ago believe it or not. I plan on playing Max Payne 2 (which I’ve never completed) next.
Just spitballing here, but if I read this correctly, you pulled the Windows drive, installed Mint, and then put the Windows drive back in alongside the Mint drive? If so, that might be the issue.
UEFI firmware looks for a special EFI partition on the boot drive, and loads the operating system’s own bootloader from there. The Windows drive has one. When you pulled the Windows drive to install Mint on another drive, Mint had to create an EFI partition on its disk to store its bootloader.
Then, when you put the Windows disk back in, there were two EFI partitions. Perhaps the UEFI firmware was looking for the Windows bootloader in the EFI partition on the Mint disk. It would of course not find it there. In my experience, Windows recovery is utterly useless in fixing EFI boot issues.
It’s possible to rebuild the Windows EFI bootloader files manually, but since you don’t mind blowing away both OS installs, I’d say just install Mint on the second drive while both of them are installed in the system, so the installer puts the Mint bootloader on the same EFI partition as the Windows one. With the advent of EFI, Windows will still sometimes blow away a Linux bootloader, but Linux installers are very good at installing alongside Windows. If it does get stuffed up, there’s a utility called Boot-Repair, that you can put on a USB disk, that works a lot better than Windows recovery.
Dang, I was unsure if Linux would mess up my windows drive, that’s why I took it out. But I guess I was wrong. So, if I’m installing Linux on a separate drive, during installation do I need to select (install along side windows) or is that only if it’s on the same drive as windows?
I just finished doing this a few minutes ago and I had better luck. I left my drives plugged in. Booted to mint USB. Made sure I knew which drive was the empty one using the Disks app. Ran the installer and chose the option to erase disk instead of alongside. Set my BIOS to boot from new disk, and grub let’s me choose between windows and Linux.
My laptop on the other hand, was not a good time. It shipped using the raid controller, so mint couldn’t see the second drive. And windows freaked out at the change of disk controller and I couldn’t recover. 2 operating system installs for the price of one 🫠
I appreciate the response and time to test his yourself. I will try again without removing my windows drive. That’s too bad for your laptop tho. I didn’t realize that laptops would ship with raid. Is that common now?
Sorry, that I’m not certain of, since that’s an installer-specific thing. I think I’d try that option first, and see if the installer lets you choose the empty drive.
I’ve been playing No Man’s Sky since they released the 5.0 content update. It’s made a huge difference in the look and feel of the game with things like modeled weather and oceans, and I’ve recently learned that sentinel attacks stop after you blow up the freighter they warp in.
Your phone has something called an accelerometer in it, it’s a sensor that can tell the orientation of the device. It tracks your rhythm with the phone swinging left and right to tell when you take a step or climbed some stairs. Many apps also use your GPS location to give you a rough estimate if your accelerometer isn’t up for it.
The sensor to detect the orientation of the phone is the gyroscope sensor not the accelerometer, which is only there to measure acceleration of the phone.
Not quite right. The gyroscope tracks rotation. It’s really good at telling when your phone is making rapid turns, but has a a really hard time knowing the difference between a stationary phone and one that’s turning very slowly. It also can’t tell which direction it’s starting from.
The accelerometer is used to tell which way is down, by averaging the acceleration of gravity over time. It can get confused while the phone is in motion, but when things slow down it keeps the gyroscope from wandering around.
Make sure the LED bulbs you’re using are rated for use in enclosed fixtures. Heat is the #1 killer for them. My basement is equipped with a bunch of enclosed fixtures that had 3 bulbs each in them, and they kept killing LED bulbs because the trapped heat had nowhere to go. They were designed for incandescent bulbs that didn’t care about being hot.
I am using GE daylight and they say 13 year guarantee on the box. They are at least 2 times as much money as all the imported ones. I have used Walmart and similar and they never last. I tried OSRAM made in Germany and they sucked for brightness. All my lights are not enclosed. They are all open air fixtures with lamp shades and my ceiling fans all have 4 candelabra style. The longest I have gotten any to last is 3 years.
I’ve only had one led light bulb fail so far despite being an early adopter. And it failed by starting to flicker occasionally, not burn out. So the rest have lasted almost 20 years now.
Might be time to look into what you are feeding them. Check if your power is regular.
I remember when I was running the numbers for my dads house. I asked him how often he changes a lightbulb. I worked out it was cost effective to change the light bulb based on replacement alone before I even got to the electricity cost.
I honestly don’t think I have ever replaced a LED.
I am using GE daylight and they say 13 year guarantee on the box. They are at least 2 times as much money as all the imported ones. I have used Walmart and similar and they never last. I tried OSRAM made in Germany and they sucked for brightness. All my lights are not enclosed. They are all open air fixtures with lamp shades and my ceiling fans all have 4 candelabra style. The longest I have gotten any to last is 3 years.
GE is terrible. Use Phillips or Cree. Also turning them on and off often does shorten the lifespan. I’ve had some running 24/7 for maybe 8 years at this point and they’re still going strong.
kbin.life
Hot