I think I will stop using Gandi. They are too expensive and don’t provide much value compared to other registrars.
The price for the TLD of my custom domain doubled. With the new prices, it’s cheaper for me to get the domain at OVH (cheaper than Gandi’s previous price) and mailboxes at mailbox.org, than the domain alone at Gandi.
They’re not even trying to pretend they offer competitive domain prices anymore. Last time I renewed the prices for the 5 TLD’s I use varied $15-22, this year they’re all $30. That’s a 75-100% increase accross the board.
Thank you for providing the details. Based on your requirements, you can achieve your goal by utilizing the Linux bridge functionality to create a software-level Layer 2 switch. Here’s an outline of the steps involved:
Install the necessary software: Ensure that the bridge-utils package is installed on your Linux machine. You can typically install it using the package manager specific to your distribution. For example, on Ubuntu or Debian, you can run sudo apt-get install bridge-utils.
Identify your physical network interface: Determine the name of your WiFi network interface that is connected to the ISP router. You can use the ip link command to list the available network interfaces. Look for the interface name associated with your WiFi connection (e.g., wlan0).
Disable network management on the physical interface: To prevent network managers from managing the physical interface directly, you’ll want to disable their control. This step may vary depending on your specific network manager. For example, if you’re using NetworkManager, you can edit the configuration file associated with your WiFi connection (usually located in /etc/NetworkManager/system-connections/) and set managed=false. Alternatively, you can stop or disable the network manager service temporarily.
Create a bridge interface: Create a Linux bridge interface using the brctl command. For example, you can run sudo brctl addbr br0 to create a bridge named br0.
Add the physical interface to the bridge: Add your WiFi interface to the bridge using the brctl addif command. For example, run sudo brctl addif br0 wlan0 to add wlan0 to the bridge.
Configure the bridge interface: Assign an IP address to the bridge interface (br0) by configuring it in the network configuration files. The specific file to edit depends on your Linux distribution. For example, on Ubuntu or Debian, you can edit /etc/network/interfaces and add the following lines:
Alternatively, you can use network management tools like NetworkManager or systemd-networkd to configure the bridge interface.
Configure the virtual machines and containers: Configure your virtual machines, Docker containers, and systemd-containers to use the bridge interface (br0) as their network interface. This configuration varies depending on the specific technology you are using. For example:
For Docker: Create a new Docker network of type “bridge” and specify the bridge name as br0. Then, when creating or running Docker containers, connect them to this network.
For systemd-containers: Configure the [email protected] and [email protected] units to attach the container to the bridge interface (br0). This can be done using the systemctl command and systemd network configuration files.
With these steps, your virtual machines, Docker containers, and systemd-containers should be able to obtain IP addresses directly from your ISP router via the software-level Layer 2 switch created using the Linux bridge interface.
Please note that the specific commands and configuration files may vary depending on your Linux distribution and network management setup. Make sure to adapt the instructions accordingly. Additionally, be cautious when modifying network configurations as it can potentially impact your network connectivity.
That sounds like the right middle ground for me. I know for sure my home network is not as secure as it could be, especially since I live with people who need everything online to work without obstacles. I can’t even install PiHole.
But, hosting is probably more affordable in a year than the amount I might spend on coffee in a week. And I typically make my own coffee.
Hate does not work, known issue and they’re planning on fixing that later. Currently the only melee weapons that work for that challenge are Innodem and Praedos. Also Laetum, Phenmor and Ferox are the only guns that work currently for that challenge.
I use INWX. Prices are very cheap and their DNS supports most of the record-types available, which I didn‘t have at some of the registrars I was at before.
How does the INWX DNS edit look like? In their docs I saw they offer a table where you can edit records one by one, using their predefined form. Do they also offer a way to edit all records at once as text?
I will raise you one. Sometimes I see lots of colors and patterns right before I sleep or wake in the middle of the night. Like I took some sort of psychedelic
You’re right! But once it happened when I was partially off the bed with my head hanging off, so combined with blood rush to my head and a pounding headache! But the patterns were cool at least
When I was playing around with the Pixel, I already tried making display size the smallest. Notification shade didn’t change, and neither did those damn quick toggles :(
Still bewilders me Google got rid of the 2 button navigation style. They hit the nail on the head with that one, it was a perfect balance of convenience and speed, and they went and gutted it for a half-baked ripoff of iOS’ gesture system. Cannot explain how upset I am over that.
You can switch back to 3 and 2 button navigation in the settings if you want. I use the 3 button navigation. I use all three buttons.
I think it’s their way of admitting gestures is stupid. Gestures makes it unclear where the OS UI ends and where the app UI begins. A completely shit idea.
What version of Android are you on? Android 12 or below? It was removed entirely in Android 13. It can be “patched back in” on a custom ROM, but doing so breaks the recents screen due to incompatible changes made to the system launcher (which handles the recents screen for… some reason).
Or maybe you have a Samsung or other phone that has their own 2 button implementation. But as far as I’m aware, it’s gone from AOSP as of Android 13 :(
My overall journey was the GameFAQS message boards -> Digg -> Reddit (via RIF) -> Lemmy
Lemmy has filled my content aggregation desires while boycotting Reddit. Overall, I could see being here to stay
I’m still having minor issues, but they aren’t deal breakers. Like, I’ve had issues with my up votes not saving (press it, turns blue, wait a second, then it changes back), so I need to press it multiple times before it saves. On the whole, these errors will be resolved with time, so it doesn’t bother me much
Main issue I’m trying to figure out now is: how to use federated users for other Lemmy instances. If I’m using the website for beehaw, then go to another instance, it appears I need to sign in, but I can’t see how to use my beehaw account. I started using Jerboa and it seems to handle it, but the comments I’m making don’t show up (when I checked in a browser), so it might be in the UI only, or I’m missing something
This, the polarity of the cell which permits selective permeability & a hydrophilic environment means alcohol’s will be functional as antiseptics due to the hydroxyl (OH) group. However, alcohol needs to be approximately 70% for max efficiency as OH2 facilities it’s ability to denature the cell.
I’m working on a project to host bits of Lemmy on peer cache devices run by the community – if you’re interested to take a look or help test/code, I should have code for some of the caching bits within a few days.
kbin.life
Top