Small Unraid PC with 2 HDDs. Silverstone SG13 case with Asrock N100DC-ITX, the SATA power cable was too short so I had to improvise.
The Asrock N100DC-ITX uses a 19v power brick so no separate PSU to power the drives. It comes with a 4 pin cable that splits into 2 SATA power.
https://lemmy.world/pictrs/image/c6246430-1975-49ed-851c-a76df2dbc15d.jpeg
The case I chose, Silverstone SG13, comes with a 3.5" HDD bracket but you need to mount the drive belly up so you can screw it in. The second drive I want to put where the PCIe slot is, found a nice 3d model for that. The thing is, the power cable would be too short and the drives would be too far apart to reach both.
https://lemmy.world/pictrs/image/1e6e71b4-c5c7-46f7-9f70-8d8b24743381.jpeg
So I removed the HDD bracket and cut 2 L-shaped aluminum stripes and I screwed the drive belly down. This way the cable now reaches both drives. I know, I could have cut the cable and made it longer but I prefer to avoid playing with power cables if I can.
Turned out quite good. Wanted to share it with other people. Now I need to find someone to 3d print the PCIe HDD holder and find some rubber stuff to put under the L-shapes to dampen the sound of the drive. This is the 3d model, www.printables.com/…/385403-pci-slot-hdd-bracket but V2 with the nice feet.
PS the drives in the images are broken so I just used them as dummy drives.
https://lemmy.world/pictrs/image/b021cc10-bad0-4e6f-b8de-73b313de06ab.jpeg
https://lemmy.world/pictrs/image/df815343-bb0f-482f-b1eb-4feda7998fca.jpeg
That’s about it.