If they made the spout longer, people would complain that they hit it with their shoes while riding. Or complain that it limits their ability to put on aftermarket pipes. Or some other issue that might be caused by it being longer. It is all about trade-offs.
Of all the options, I think dealing with a little oil on the pipes every 3000 miles or so is reasonable, especially since a piece of tin foil would solve the problem.
I had an '85 Dodge Omni GLH (turbo) where that had the oil drain plug directly over a cross member. I don't know if that was standard in the Omni or added for the GLH but when you drained the oil it just went everywhere. My oil drain pan wasn't big enough to catch it all. I stopped doing my own oil changes on that car.
Honestly they sound like asshole engineers trying to justify their poor quality of work. Cardboard, tinfoil, and brake cleaner can’t excuse a poor design.
Make the exhaust curve back a bit? More expensive to make the part than having a straight pipe with just one bend.
Dent the exhaust? Affect flow, create hot spot right under the oil drain plug.
Expect people to be intelligent enough to put some cardboard or foil under the plug so they don’t spill oil on the exhaust? Idiots are complaining and posting their failure on the internet and blaming you.
You can plainly see that there’s plenty of other material sticking out much further than any 1cm extension. If you were in a crash that ate through all that material first, I’m sure the engine casing would be the least of your worries.
No, this is not asshole design. If the oil port was sticking further out, it’s gets knocked off if you lay the bike down. And then you have no oil at all, and a blown up motor.
It’s by good design the oil port is recessed. Yes it’s annoying to use a funnel, but it’s the preferable option.
?? Oil port would only need to be extended by like 0.5" to clear that exhaust pipe, the casing to the left extends probably 1-2" from that. If you lay the bike down it that casing would stop the oil port from being touched. Shouldn’t be an issue.
I’m not a motorbike person, but couldn’t they sell a 50 cent plastic thingy you could screw on instead of the cap that would make it go into some container even?
Plastic would be a bad idea, but there’s a company called Fumoto that makes a ball valve replacement for the drain pan plug that has a hose barb on the end.
My Funduro does the same thing, but right at the header so if you get any oil at all on the pipe you get a nice cloud of smoke upon firing the bike up.
I still prefer dealing with that though over how my WR400 makes you take the header section off in order to change the oil filter. That gets more annoying - particularly as that's something one has to do pretty regularly on that bike.
Tipping it over could cause a drop, which could be costly to replace. And if you’re just holding it to one side. You’d need a second person to either hold it, or take the plug out.
files.catbox.moe
Newest