There have been multiple accounts created with the sole purpose of posting advertisement posts or replies containing unsolicited advertising.

Accounts which solely post advertisements, or persistently post them may be terminated.

Edit: Flatpak (possibly regression) issue caused by either xdg-desktop-portal-gtk and/or xdg-desktop-portal-gnome

Former title: SSD having issues after I filled up its storage

I wrote this poorly last time so here’s a more clear description: Hey all, so I filled my SSD up on Linux Mint and it’s running sluggishly. I deleted more than half of my storage but there’s still issues. It can read / write fast according to my inexperienced testing and I have trimmed it (to my knowledge) but there’s still issues. Loading up programs now takes 30 seconds (even something like VLC which typically took like 0.5 seconds). Loading new audio files into VLC can take 10 seconds. I have checked my system monitor and nothing seems out of place. Also, when the program starts running, it runs perfectly. The computer itself is fast but loading anything new takes ages. Does anyone have any ideas? It’s a new laptop, not even two months old.

Edit: This is somehow, and strangely, a Flatpak issue apparently? It was triggered either by a full SSD or the new Linux Mint 21.3 Cinnamon update.

Edit 2: Interesting experiment result

‘it took 30 seconds but this got outputted and then the file ran: dave@dog: ~$ flatpak run org.x.Warpinator Gtx-Message: 14:29:03.389: Failed to load module “xapp-gtk3-module” Using landlock for incoming file isolation’

It appears there’s either a xdg-desktop-portal-gtk and/or xdg-desktop-portal-gnome error and I’m not alone, Mint and Arch users are both reporting it as of recent strangely???

This was a real sneaky fu(ker as it dodged all logical system testing. The only reason I caught it was cause it was suspicious how fast system programs booted and how flatpaks booted like sh(t. Not sure if I’m even right about the module, but I’m highly suspicious

Some comment mentioned this and it explained it well: Random shot, because it’s probably not an issue on Mint like it was on Arch a few months ago, but xdg-desktop-portal problems can cause apps to take forever to load, but run fine once loaded.

edit: Try removing xdg-desktop-portal-gtk and/or xdg-desktop-portal-gnome

PseudoSpock ,
@PseudoSpock@lemmy.dbzer0.com avatar

Flatpak on Arch? Is what you want not in the AUR?

jackpot OP ,
@jackpot@lemmy.ml avatar

no flarpak on linux vut apparently this imapcts flatpak on arch as well

PseudoSpock ,
@PseudoSpock@lemmy.dbzer0.com avatar

I’m sorry, I found your response confusing. Arch is a Linux distro, I know flatpak is available for it. If there’s a bug with flatpak, I would expect it to be pretty much the same across most GNU based Linux systems. My question, however, was why use flatpak on Arch Linux at all, as the AUR has pretty much everything including the kitchen sink… unless you are developing flatpaks, I guess, in which then it would make sense to me.

You don’t owe me an explanation, it just sounded odd to me to be needing flatpak when there was AUR, was all.

Unyieldingly ,

I had this issue as well, but my file system was broken when i was trashing a OS, I did not know it was xdg-desktop-portal-gtk or xdg-desktop-portal-gnome I think it was Debian with cinnamon or maybe LMDE.

Bipta ,

In my experience once you fill an SSD it takes a long time for the performance to recover even after clearing it out, but I don't know why.

I partition my SSDs to make sure in never fill them.

vanderbilt ,
@vanderbilt@beehaw.org avatar

Usually trim runs on a cycle, either invoked by the OS or triggered by the drive. The time between trim and you deleting the files may see a performance hit as the firmware has to check if the blocks are in use, rather than knowing beforehand if they are.

Guenther_Amanita ,

What do you mean with “Deleted half of my storage”?
How did you do that? Did you just go into your file manager and deleted some photos, or did you remove partitions and stuff outside of /home/?

You know of the “linuxatemyram.com”-site, do you? Did you try to “optimize” the RAM consumption or other performance tweaks? It sounds like you “don’t have enough RAM” and then Linux tries to use the swap space, pulling stuff from your SSD.

Did you install Mint freshly onto the new SSD? Did you use the recommended partioning-layout (regarding swap space)?

I hate to say it, but did you try to reinstall your OS? Maybe that might help…

jackpot OP ,
@jackpot@lemmy.ml avatar

i deleted half of the data on the ssd (no it’s not in the trash folder.) i deleted timeshift files and unused apps. how do i optimize ram consumption and get ‘other performancw tweaks’. i shouldnt be running out of ram if nothing is loaded and i just booted up? yeah i installed mint on to the ssd when i got it. i dont dual boot so do i need to partition? no i have not reinstalled linux but i might

Guenther_Amanita ,

i deleted half of the data on the ssd (no it’s not in the trash folder.) i deleted timeshift files and unused apps.

Can you name a few examples? Apps usually don’t need much data, and timeshift backups aren’t accumulative, so only the first one is big, and the following ones are just a few MBs big.
Why not store them on an external drive? That would be the best method anyway, in case you can’t access your PC.

how do i optimize ram consumption and get ‘other performancw tweaks’. i shouldnt be running out of ram if nothing is loaded and i just booted up?

Easy. You don’t :) Linux is already very optimized ootb, and the only thing you can install for example is TLP, a battery life prolonger for better runtime on laptops.
Other than that, don’t. And take a look at the link, everything gets explained very well and simple there.

i dont dual boot so do i need to partition?

If you have to ask this, it should be fine. The default layout on Mint is good as is.

no i have not reinstalled linux but i might

Remember to backup your data!!!
If you haven’t made many customisations, every file should be restored easily. Might help, but keep an eye on your actions.

Don’t do stupid things and maybe consider immutable distros, like Fedora Silverblue, since you can’t mess up anything on them.

jackpot OP ,
@jackpot@lemmy.ml avatar

read the edited post! apparently somethings wrong with the gtk3 module, im only having slow boots for flatpaks!!

bazsy ,

What filesystem are you using? Is it encrypted?

Could you run a benchmark to verify if reads and writes are both affected? KDiskMark is like crystaldiskmark or Gnome Disks has a built in benchmark.

jackpot OP ,
@jackpot@lemmy.ml avatar

not encyrpted. i tried running a write test in gnome disks but i get 'error unmounting /dev/nvme0n1p2: target is busy (udisks-error-quark, 14)

MRLimcon ,
@MRLimcon@lemmy.ml avatar

I had this problem with flatpaks, I changed the dbus implementation to dbus-broker (in endeavouros) and it fixed the issue. It may be the same problem.

jackpot OP ,
@jackpot@lemmy.ml avatar

how do yoy do that

MRLimcon ,
@MRLimcon@lemmy.ml avatar

I installed dbus-broker and the package manager checked the dependencies and removed the unnecessary stuff. After that I applied the dbus-broker services:

systemctl enable dbus-broker.service

sudo systemctl --global enable dbus-broker.service

And then restarted.

Idk if it might break things in mint, so I would be cautious.

jackpot OP ,
@jackpot@lemmy.ml avatar

by any chance does this have to do with gtk3?

MRLimcon ,
@MRLimcon@lemmy.ml avatar

Yes, I remember reading about a gtk thing that interacts with flatpak, they said it should not give this error in April, but it seems to still be happening, idk.

Edit: I just saw that you deleted the gtk portal and it worked! So no need to install another dbus daemon.

jackpot OP ,
@jackpot@lemmy.ml avatar

alright edit: I have a Flatpak issue, not an SSD issue. does anyone have any thoughts? this could be due to the new linux mint update. my pc is a samsung galaxy s2 (750XED P13CFG)

jackpot OP ,
@jackpot@lemmy.ml avatar

the linux mint discussion forum has a post about my model not being great but last update my system worked just fine. i actually think having a full ssd broke flatpak. otherwise ive hit a horrible regression issue github.com/orgs/linuxmint/discussions/277

danielfgom ,
@danielfgom@lemmy.world avatar

Backup and install a fresh Linux Mint.

infinitevalence ,
@infinitevalence@discuss.online avatar

How long ago did you delete everything?

SSD’s dont work like old HD’s depending on the generation of tech it might be storing multiple values per cell which means when you “filled” the SSD you put a charge into every single storage cell on the drive.

Garbage collection and TRIM will slowly over time clear out all the cells flagged as deleted but if one bit is still valid in a cell that was holding 3-4 other bits it cant overwrite that, or relocate it.

That means that your files/videos and such stay fragmented and may never get put back together sequentially or in a way that the controller can optimize again for speed.

The only fix, may be running a factory wipe from the Drive MFG’s tool set, that should fully blank each cell and let you re-install and make it feel fresh again.

Be warned though, you have already done a full drive write once at least, this would be another. You can expect some dead cells and while there is over provisioning that should provide replacements you could see a loss in usable space sooner than later.

jackpot OP ,
@jackpot@lemmy.ml avatar

i deleted everything ywsterday, and i trimmed today. i was unaware of the dead cell issue. is there a way to disk defragment an ssd?

infinitevalence ,
@infinitevalence@discuss.online avatar

in theory time, it should slowly rewrite everything to consolidate it. If you dont have time, then factory format and reinstall.

ipacialsection , (edited )
@ipacialsection@startrek.website avatar

It still sounds to me like something’s up with the disk. Can’t think of any solutions to suggest but I would run a SMART health check on it:


<span style="color:#323232;">sudo apt install smartmontools  
</span><span style="color:#323232;">sudo smartctl -a /dev/sda
</span>

If you prefer a graphical tool, you can do the same thing with GNOME Disks, which also has options for disk benchmarking.

In the resulting report, the overall health state should be “PASSED”, the “Type” column should show “Pre-fail” and “Old age” values, and the “Media-Wearout-Indicator” should be close to 100. If the overall health state is “FAILED”, then you will want to back up your files immediately and consider getting a new SSD.

jackpot OP ,
@jackpot@lemmy.ml avatar

ive tried that actuqllt, it said there was no dev/sda. it did aay there was a dev/nvme0. scanned it and it ‘passed’ but i can try again

ipacialsection ,
@ipacialsection@startrek.website avatar

/dev/nvme0 is probably your SSD. But if it passed you probably have nothing to worry about

be_excellent_to_each_other ,
@be_excellent_to_each_other@kbin.social avatar

fwiw in the future you can find out the path to your drives and their uuid if needed with

lsblk -f

jackpot OP , (edited )
@jackpot@lemmy.ml avatar

wait i think ive had a breakthrough, all system packages SEEM to run fine but all flatpak applications are effected. this seems to be flatpak related

jackpot OP ,
@jackpot@lemmy.ml avatar

just tested it, vlc system package opens in .2 seconds but flatpak opens in 30 seconds.

jackpot OP ,
@jackpot@lemmy.ml avatar

this impacts file access speeds too, system package opens things in like .2 of a second but flaptak again takes like 30

db2 ,

Who’d have ever thought that having 47 copies of a library instead of using a shared library wouldn’t work out great. 🙄

jackpot OP , (edited )
@jackpot@lemmy.ml avatar

i do it for the sandboxing and flatseal. any suggestions?

db2 ,

Not specifically. It’s probably actually a configuration problem though, for any other program I’d delete or default the settings. Not sure how to do that for flatpak itself as I won’t use it.

jackpot OP ,
@jackpot@lemmy.ml avatar

why wont you use it

db2 ,

The only use case I can see with any validity is for the sandboxing features, and I have no need of that currently.

32b99410_da5b ,

You mean 1 copy and 46 links.

Flatpak isn’t a disk hog and this urban legend is dumb.

db2 ,

You mean 1 copy and 46 links.

That’s a shared library with extra steps. It’s also loaded 47 times. Thanks for playing.

ipacialsection ,
@ipacialsection@startrek.website avatar

Definitely flatpak related then. Try running one of your flatpak apps from the terminal, and post the output here; might help pinpoint the issue. You can list the ones you have installed with flatpak list, then flatpak run <one of the listed apps, e.g. org.videolan.vlc>.

jackpot OP ,
@jackpot@lemmy.ml avatar

it took 30 seconds but this got outputted and then the file ran: dave@dog: ~$ flatpak run org.x.Warpinator Gtx-Message: 14:29:03.389: Failed to load module “xapp-gtk3-module” Using landlock for incoming file isolation

ipacialsection ,
@ipacialsection@startrek.website avatar

Looking online, there are some suggestions to either (re)install xapp:

sudo apt install --reinstall xapp

or a related library:

sudo apt install --reinstall gir1.2-xapp-1.0

However, usually I find that errors like this mean nothing, so I wouldn’t be surprised if these steps change nothing.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • random
  • [email protected]
  • lifeLocal
  • goranko
  • All magazines
    •